Manual and tips for your carcover

Very easy 1-person installation

Basic Tips:

• Make sure that the cover is neatly folded back in the bag after each use. This promotes the life of the car cover.
• When placing the car cover, make sure that it does not get caught behind sharp edges or protruding parts of the car.
• Do you have a convertible with a fabric top? The cover may stick to the hood, lift the cover a little to get air under the cover.
• If you have a cover with printing, fold it after use so that the printing faces upwards. The cover is as good as wrinkle-free, but the printing is not.

Indoor car cover without mirror pockets

Indoor car cover with mirror pockets

Outdoor car cover

Before you install the cover to your car, be sure that the car is clean, dry and free from hard bits an loose pieces. This way you maintain the car and cover in perfect conditino.


Lay down the cover on the roof of your car, the labels signal which side is front and rear. Unroll the cover over the roof to the hood and tail of the car.




Now you can unfold the sides of the cover by flaping them open. First pull the front of the cover around the nose of your car, then do the same on the rear of your car.

Tips for a longlasting cover

Make sure your antenna is hidden or removed, this will keep the antenna from making a hole in the cover eventually. If you drive a convertible, close the roof before installing the cover.
Please let remove the cover once per month to let some fresh air to the car and cover, this way any condens will slip away.
Over time and due to the pressure of the moisture, the cover can eventually start to leak, a treatment with a high-quality product such as Stimex Waterproof - Spray extends the pleasure of your cover!



The motor and exhaust are cooled down, after washing the car or rain, make sure the car is dry before installing.